Raven RP10 Perimeter Seal
|Select options to check stock
An effective acoustic door stop frame seal which is quick and easy to install on plain or rebated door frames. Multi-fin design for improved noise and energy sealing. The minimum deflection design creates maximum sealing efficiency.
RP10 can be mitred or butt jointed for a neat finish. Adjustable by large concealed fixing slots for a precision fit. RP10 has a tamper resistant, rigid PVC cover strip (SE). Can be used on all four sides of the door to form a bulk head seal.
Note: If fixing to rebated frames of single doors, specify a long backset door latch.
Location: Head and jambs of single and double butt hinged doors.
Min/Max Gap: 0mm to 10mm
Finish: Satin clear (silver), bronze anodised aluminium (15micron) or paint at extra cost.
Fixing: Screw fix. Zinc plated, cross recess head S.T. screws supplied.
Seal: RP410. Black flexible PVC. Black rigid flexible PVC (SE) cover strip.
Sizes: Available in door set sizes or stock lengths.
Acoustic AUS/NZ: NCC Spec. F5.5.
UK/EU: Approved Document E. Rated to BS EN ISO 717.1.
Fire AUS/NZ: NCC Spec. C3.4. AS1530.4 & AS/NZS 1905.1. NZ BC Compliance Doc. C/AS1 6.19.2 & App. C6.1.1.
UK/EU: Approved Document B. BS 476 Pt. 20 & 22 (similar to BS EN 1634-1).
FRL & FRR-/240/30 and FD240.Fire Approved
Energy NCC Pt. 220.127.116.11 & J3.4.
|Product Finish or Colour
|Clear Anodised (CA)
|Includes Fixing Screws
Different products are fire tested for use with specific fire rated doors only. Ensure you check with the manufacturer that this product is suitable for the door it is intended to be installed on.
|Acoustic Rated to AS1191 and ISO140.3
|Suitable for Smoke Doors
Suitable for Smoke Doors
This product has been tested in specific combinations on specific door types. Please ensure you check the manufacturer’s documentation to confirm its suitability for your door and smoke requirements.
|Suitable for Door Type
|Timber / Aluminium
|Bush Fire Attack Level
|Contains Intumescent Material
|Seal Can Be Installed
|Gasket / Seal Colour
|Min Door Gap
|Max Door Gap