Raven RP44Si Perimeter Seal
|Select options to check stock
An effective acoustic and medium temperature smoke seal, the RP44Si has two extruded silicon bulb gaskets and can be mitred or butt jointed for a neat finish. Can be installed on door stops with sufficient depth and broad butt hinges should be specified.
Note: Check backset door latch requirements.
Location: Head and jambs of single and double, broad butt hinged doors or bulkhead applications.
Min/Max Gap: 8mm to 10mm (allow 13mm to 14mm for installation, refer to product dimensions).
Finish: Satin clear (silver) anodised aluminium (15micron) or paint at extra cost.
Fixing: Screw fix. Zinc plated, cross recess head S.T. screws supplied.
Seal: RP308Si. Grey silicon rubber (SE).
Sizes: Available in stock lengths.
Smoke AUS/NZ: NCC Spec. C3.4. NZ BC Compliance Doc C/AS1 6.19.2(b).
UK/EU: Approved Document B.
Gasket flammability index 1 when tested to AS1530.2.
Energy NCC Pt. 22.214.171.124 & J3.4.
|Product Finish or Colour
|Clear Anodised (CA)
|Includes Fixing Screws
Different products are fire tested for use with specific fire rated doors only. Ensure you check with the manufacturer that this product is suitable for the door it is intended to be installed on.
|Acoustic Rated to AS1191 and ISO140.3
|Suitable for Smoke Doors
Suitable for Smoke Doors
This product has been tested in specific combinations on specific door types. Please ensure you check the manufacturer’s documentation to confirm its suitability for your door and smoke requirements.
|Suitable for Door Type
|Timber / Aluminium
|Bush Fire Attack Level
|Contains Intumescent Material
|Seal Can Be Installed
|Gasket / Seal Colour
|Min Door Gap
|Max Door Gap