Raven RP10Si Perimeter Seal
Select options to check stock | ||
An effective acoustic and smoke door stop frame seal which is quick and easy to install on plain or rebated door frames. Multi-fin design for improved noise and energy sealing. The minimum deflection design creates maximum sealing efficiency.
RP10Si can be mitred or butt jointed for a neat finish. Adjustable by large concealed fixing slots for a precision fit, RP10Si has a tamper resistant, rigid PVC cover strip (SE). Can be used on all four sides of the door to form a bulk head seal.
Note: If fixing to rebated frames of single doors, specify a long backset door latch.
Location: Head and jambs of single and double butt hinged doors.
Min/Max Gap: 0mm to 10mm.
Finish: Satin clear (silver), bronze or black anodised aluminium (15micron) or paint at extra cost.
Fixing: Screw fix. Zinc plated, cross recess head S.T. screws supplied.
Seal: RP310Si. Black or light grey silicon rubber (SE).
Sizes: Available in door set sizes or stock lengths.
Approvals
UL Cert. GVYI.R37913.
ANSI/BHMA A156.22.
Acoustic AUS/NZ: NCC Spec. F5.5.
UK/EU: Approved Document E. Rated to BS EN ISO 717.1.
Fire AUS/NZ: NCC Spec. C3.4. AS1530.4 & AS/NZS 1905.1. NZ BC Compliance Doc. C/AS1 6.19.2 & App. C6.1.1.
UK/EU: Approved Document B. BS 476 Pt. 20 & 22 (similar to BS EN 1634-1).
FRL & FRR-/240/60 and FD240. Fire Approved
Gasket flammability index 1 when tested to AS1530.2.
Smoke NCC Spec. C3.4. AS1530.7 & BS EN 1634-3. Meets smoke leakage rates specified in AS6905 & EN 13501-2 "Sa", "Sm".
Energy NCC Pt. 3.12.3.3 & J3.4.
Registered Design.
MPN | A10SIC |
---|---|
Brand | Raven |
Product Width | 28mm |
Product Height | 16mm |
Product Warranty | 2 Years |
Product Material | Aluminium |
Includes Fixing Screws | Yes |
Fire Tested Fire TestedDifferent products are fire tested for use with specific fire rated doors only. Ensure you check with the manufacturer that this product is suitable for the door it is intended to be installed on. | Yes |
Acoustic Rated to AS1191 and ISO140.3 | Yes |
Suitable for Smoke Doors Suitable for Smoke DoorsThis product has been tested in specific combinations on specific door types. Please ensure you check the manufacturer’s documentation to confirm its suitability for your door and smoke requirements. | Yes |
Suitable for Door Type | Timber Doors, Aluminium Doors |
Bush Fire Attack Level | BAL<FZ |
Contains Intumescent Material | No |
Seal Can Be Installed | Surface Fix |
Gasket / Seal Colour | Grey |
Gasket Material | Silicon |
Min Door Gap | 0mm |
Max Door Gap | 10mm |
Self Adhesive | No |