Australia-Wide Delivery
Flat $11 shipping for most orders
Raven RP129F Door Bottom Sweep Seal 18mm - Clear Anodised Aluminium
Login or apply for trade pricing.
From $64.09
MPN
A129F
SKU
RP129F
Stock Availability
| Select options to check stock | ||
A heavy duty medium temperature smoke door bottom seal. The seal is achieved by a pair of nylon brush strips with a medium temperature smoke barrier. The seal can be checked out or drilled to accommodate the pivot, thereby providing a continuous seal. Can be used in conjunction with RP130Si, other Raven perimeter seals and threshold plates.
Location: Bottom of double butt hinged or centre pivot double acting doors.
Min/Max Gap: 15mm to 18mm.
Finish: Satin clear (silver) anodised aluminium (15micron) or paint at extra cost.
Fixing: Screw fix. Zinc plated, cross recess head S.T. screws supplied.
Seal: RP52F. Black fine and dense nylon filaments, UV stabilised medium temperature smoke barrier fin and galvanised steel spine.
Sizes: Available in stock lengths.
Approvals
Smoke AUS/NZ: NCC Spec. C3.4. NZ BC Compliance Doc. C/AS1 6.19.2(b). AS1530.7 & BS EN 1634-3 (similar to BS 476 section 31.1). Meets smoke leakage rates specified in AS6905 & EN 13501-2 "Sa", "Sm".
Energy NCC Pt. 3.12.3.3 & J3.4.
Durability Tested to over 1,000,000 operating cycles without failure.
Patented, Registered Design.
| MPN | A129F |
|---|---|
| Brand | Raven |
| Product Height | 18mm |
| Product Warranty | 2 Years |
| Product Thickness | 38mm |
| Product Finish or Colour | Clear Anodised (CA) |
| Product Material | Galvanised Steel |
| Includes Fixing Screws | Yes |
Fire Tested Fire TestedDifferent products are fire tested for use with specific fire rated doors only. Ensure you check with the manufacturer that this product is suitable for the door it is intended to be installed on. | No |
| Acoustic Rated to AS1191 and ISO140.3 | No |
Suitable for Smoke Doors Suitable for Smoke DoorsThis product has been tested in specific combinations on specific door types. Please ensure you check the manufacturer’s documentation to confirm its suitability for your door and smoke requirements. | Yes |
| Suitable for Door Type | Timber Doors, Aluminium Doors |
| Bush Fire Attack Level | BAL <29 |
| Contains Intumescent Material | No |
| Seal Can Be Installed | Surface Fix |
| Brush / Gasket Length | 11mm |
| Gasket Material | Nylon Brush |
| Max Door Gap | 18mm |
| Self Adhesive | No |
