Raven RP16Si Astragal Meeting Stile Seal - Clear Anodised Aluminium
Select options to check stock | ||
RP16Si is an acoustic, smoke astragal. Its proven design is effective in sealing the meeting stiles of plain or rebated double doors. Its aluminium trim neatly conceals the sealing portion of the seal and provides a secure weatherproof rebate stop. If necessary, its aluminium fixing leg can be checked out to allow for locks and latches.
For maximum acoustic performance, specify two seals, i.e. one for each door leaf. (Minimum door thickness subject to centre latch and dimensions of morticed door bottom seals).
RP16Si is used where one door leaf is active. For smoke door magnetic hold open applications such as hospital corridors, sequence select door closers are required.
Location: Meeting stiles of double butt hinged doors.
Min/Max Gap: 2.5mm to 8mm.
Finish: Satin clear (silver), bronze, black anodised aluminium (15micron) or paint at extra cost.
Fixing: Screw fix. Zinc plated, cross recess head CSK S.T. screws supplied. Can be rebated or surface mounted. Fixing holes are pre-drilled
Seal: RP316Si. Grey silicon rubber (SE).
Sizes: Available in stock lengths.
Approvals
ANSI/BHMA A156.22
Acoustic AUS/NZ: NCC Spec. F5.5.
UK/EU: Approved Document E. Rated to BS EN ISO 717.1.
Fire Gasket flammability index 1 when tested to AS1530.2.
Smoke NCC Spec. C3.4. AS1530.7 & BS EN 1634-3. Meets smoke leakage rates specified in AS6905 & EN 13501-2 "Sa", "Sm".
Energy NCC Pt. 3.12.3.3 & J3.4.
MPN | A16SIC |
---|---|
Brand | Raven |
Product Width | 24mm |
Product Thickness | 22mm |
Product Finish or Colour | Clear Anodised (CA) |
Product Material | Aluminium |
Includes Fixing Screws | Yes |
Fire Tested Fire TestedDifferent products are fire tested for use with specific fire rated doors only. Ensure you check with the manufacturer that this product is suitable for the door it is intended to be installed on. | No |
Acoustic Rated to AS1191 and ISO140.3 | Yes |
Suitable for Smoke Doors Suitable for Smoke DoorsThis product has been tested in specific combinations on specific door types. Please ensure you check the manufacturer’s documentation to confirm its suitability for your door and smoke requirements. | Yes |
Suitable for Door Type | Timber Doors |
Bush Fire Attack Level | BAL<40 |
Contains Intumescent Material | No |
Seal Can Be Installed | Surface Fix |
Gasket / Seal Colour | Black |
Gasket Material | Silicon |
Min Door Gap | 2.5mm |
Max Door Gap | 8mm |
Self Adhesive | No |
Product Warranty | 2 Years |