Raven RP78HSi Perimeter Seal - Clear Anodised Aluminium
Select options to check stock | ||
This medium temperature smoke seal is designed for clean room and health care facilities. RP78HSi has an easy wipe clean design where the smooth sealing gasket also contains an antimicrobial additive for maximum protection against surface bacteria.
For installation on door stops. Its aluminium carrier is sturdy and slotted for adjustment with concealed fixings. It is quick and easy to install around the jamb and head and can be fitted without removing the door. The RP78Si can be mitred or butt jointed for a neat finish.
Can be used in conjunction with the Raven RP8Si, RP16Si, RP35Si, RP38Si, RP99Si, RP126Si, RP127Si or RP128Si automatic door bottom seals.
Location: Head and jambs of single and double butt hinged doors.
Min/Max Gap: 0mm to 6mm.
Finish: Satin clear (silver) anodised aluminium (15micron) or paint at extra cost.
Fixing: Concealed screw fix. Zinc plated, cross recess head S.T. screws, self drilling screws (metal) and cover strip supplied.
Seal: RP394HSi. Grey or light grey silicon rubber (SE).
Sizes: Available in door set sizes.
Approvals
Fire AUS/NZ: NCC Spec. C3.4. AS1530.4 & AS/NZS 1905.1. NZ BC Compliance Doc. C/AS1 6.19.2 & App. C6.1.1.
UK/EU: Approved Document B. BS 476 Pt. 20 & 22 (similar to BS EN 1634-1).
FRL & FRR-/240/30 and FD240. Fire Approved
Gasket flammability index 1 when tested to AS1530.2.
Smoke NCC Spec. C3.4. AS1530.7 & BS EN 1634-3. Meets smoke leakage rates specified in AS6905 & EN 13501-2 "Sa", "Sm".
Energy NCC Pt. 3.12.3.3 & J3.4.
MPN | A78HSIC |
---|---|
Brand | Raven |
Product Width | 23mm |
Product Height | 7mm |
Product Finish or Colour | Clear Anodised (CA) |
Product Material | Aluminium |
Includes Fixing Screws | Yes |
Fire Tested Fire TestedDifferent products are fire tested for use with specific fire rated doors only. Ensure you check with the manufacturer that this product is suitable for the door it is intended to be installed on. | Yes |
Acoustic Rated to AS1191 and ISO140.3 | Yes |
Suitable for Smoke Doors Suitable for Smoke DoorsThis product has been tested in specific combinations on specific door types. Please ensure you check the manufacturer’s documentation to confirm its suitability for your door and smoke requirements. | Yes |
Suitable for Door Type | Timber Doors, Aluminium Doors |
Bush Fire Attack Level | BAL<FZ |
Contains Intumescent Material | No |
Seal Can Be Installed | Surface Fix |
Gasket / Seal Colour | Grey |
Gasket Material | Silicon |
Min Door Gap | 0mm |
Max Door Gap | 6mm |
Self Adhesive | No |
Product Warranty | 2 Years |