Raven RP60 Automatic Door Bottom Seal - 920mm - Clear Anodised Aluminium
Online | In Stock | 3 |
Adelaide | Out of Stock | Lead time - 5-10 days |
Brisbane | Out of Stock | Lead time - 5-10 days |
Darwin | In Stock | 4 |
Distribution Centre | Out of Stock | Lead time - 5-10 days |
Gold Coast | Out of Stock | Lead time - 5-10 days |
Hobart | Out of Stock | Lead time - 5-10 days |
Launceston | Out of Stock | Lead time - 5-10 days |
Melbourne | In Stock | 3 |
Sydney | Out of Stock | Lead time - 5-10 days |
An adjustable, automatic door bottom seal which is spring loaded to lift clear of the floor when the door is opened. Operated automatically by pressure against the door stopon its adjusting screw and incorporates concealed fixings. The RP60 is self levelling and can be used in conjunction with Raven threshold plates such as the RP13 and RP82.
Location: Face mounted on the bottom of single and double butt hinged doors.
Min/Max Gap: 3mm to 15mm.
Finish: Satin clear (silver), bronze or bright gold anodised aluminium (15micron).
Fixing: Concealed screw fix. Zinc plated, cross recess head S.T. screws and cover strip supplied. Fixing holes are pre-slotted.
Seal:RP460. Black TPE.
Sizes: 915mm maximum (between door stops). Unit cuts back to 450mm (min).
Approvals
Fire AUS/NZ: NCC Spec. C3.4. AS1530.4 & AS/NZS 1905.1. NZ BC Compliance Doc. C/AS1 6.19.2 & App. C6.1.1.
UK/EU: Approved Document B. BS 476 Pt. 20 & 22 (similar to BS EN 1634-1).
FRL & FRR-/240/30 and FD240.Fire Approved
Energy NCC Pt. 3.12.3.3 & J3.4.
Design for Access and Mobility High efficiency mechanism to assist with the closing force requirements detailed in AS1428.1.
Durability Tested to over 500,000 operating cycles without failure.
Patented.
MPN | R60C |
---|---|
Brand | Raven |
Product Height | 41mm |
Product Warranty | 2 Years |
Product Thickness | 15mm |
Door Seal Length | 920mm |
Product Length | 920mm |
Product Finish or Colour | Clear Anodised (CA) |
Product Material | Aluminium |
Includes Fixing Screws | Yes |
Fire Tested Fire TestedDifferent products are fire tested for use with specific fire rated doors only. Ensure you check with the manufacturer that this product is suitable for the door it is intended to be installed on. | Yes |
Suitable for Smoke Doors Suitable for Smoke DoorsThis product has been tested in specific combinations on specific door types. Please ensure you check the manufacturer’s documentation to confirm its suitability for your door and smoke requirements. | Yes |
Acoustic Rated to AS1191 and ISO140.3 | No |
Suitable for Door Type | Timber Doors |
Bush Fire Attack Level | Fire Zone |
Contains Intumescent Material | No |
Seal Can Be Installed | Surface Fix |
Gasket / Seal Colour | Black |
Gasket Material | Rubber TPE |
Min Door Gap | 3mm |
Max Door Gap | 15mm |